Assembly instructions (con’t) – Brown Products BrushOx (BC2613HER) User Manual
Page 29
Advertising
29
Assembly Instructions (con’t)
4. Remove skids (Item #6, Part # 260-026) from shipping configuration and mount
in the middle hole position.
5. Attach blade engagement cable to left handle bar as shown in Illustration C
(Below).
6. Mount throttle cable control as shown in Illustration C (Below).
7. Mount transaxle cable control as shown in Illustration C (Below).
8. Install ignition switch and switch ground wire under right transaxle cable control
mounting bolt, as shown in Illustration C (Below).
Illustration C
Advertising