BatteryMINDer 12248-AA-S1 User Manual
Page 13
Rev. F-103007
P/N VDC12248AA-S1-MNL
BatteryMINDer
®
Model 12248-AA-S1
Page 13
Simplified Operating Instructions
(Read and thoroughly understand ALL SAFETY Instructions on pages (3-7) and Qualifying
Your Battery pages 8-11, BEFORE proceeding further.
1. Attach a battery connector assembly (supplied) to output cordset of charger, either the clips or ring
terminal assembly, - NEVER BOTH at same time.
2. Attach output to battery terminals-
RED
band = Positive +
BLACK band = Negative.
2-a: Attach temperature sensor ABS-248 to battery and then to charger*.
3. Press
8A
button twice (2x) until LED is lit.
4. Press
Aviation
button twice (2x) until LED is lit.
5. Plug AC power cord into 120 Vac electrical outlet. Observe REVERSED Polarity LED indicator. If lit
RED
, reverse battery connector attachments on battery.
6. Observe Battery Connected - Error Indicator, LED Must be lit
GREEN.
**
7. Observe
GREEN
LED indicator labeled Charge-Float = Solid when charging, Blinking when main-
taining battery(s). Charger will automatically start.
IF IN DOUBT REGARDING ANY OF THE ABOVE, REFER TO FULL INSTRUCTIONS
* See detailed instructions for need and method of properly connecting sensor to battery, pgs. 21 - 24.
** See full instructions if not lit
GREEN
.