Camco D-Power 7 - Manual (Page 22)

D - P O W E R
S E R I E S
1
2
3
USER MANUAL
D-POWER 7
P.21
4.7 Filter Cleaning
The air intake on the front of your D-POWER 7 Amplifier is fitted with a re-
movable filter system. If the filter becomes clogged, the unit will not cool as
efficiently as it should and may result in reduced output levels.
WARNING: Disconnect the amplifier from the mains before removing
the front frame.
D-POWER 7 Filter Assembly
1 Foam Filter
2 Front Frame
3 Screw
To clean or replace the filter just slightly unscrew the fixing screw with the
help of a 3 mm allen key. The screw will be held back by a small plastic
spacer on the back of the frame to avoid losing it. Then shift the front frame
slightly to the right. Then you should be able to remove the frame from the
amplifier completely (pull gently to avoid any bending of the front frame).
4 OPERA
TION