Envizen HR701 User Manual
Page 10
Advertising
Using display receiver as independent A/V monitor
8
Tip: When selecting AUX input as a source channel, VOL+/VOL- buttons on the Display Receiver are
disabled. Use source device's volume control to adjust audio output instead.
Select [AUX]
source channel
AUX
AV Out
The Display Receiver unit can be used as an independent A/V monitor by connecting a local source
device such as Cable / set top box, TV, Blu-Ray player, DVD player, VCR or Media player to the “AUX”
jack (an A/V combination mini plug socket) at the left side of the panel. In this mode, you can operate the
Receiver by powering on/off, volume controls and selecting AUX channels on the Home Roam TV Display
Receiver
Advertising