Envizen HR701 User Manual
Page 7
Setting up Home Roam TV
5
Media Player
DVD or BD Player
Tips:
a) You can also use the AV cable to connect the transmitter to all devices with AV outputs. You just
need to ] switch the different sources you wish via [TV/CABLE] [AV1] [AV2] [AV3] button on the
receiver panel.
b) Use mini plug to RCA AV female cable adaptor with RCA to RCA cable, included in the package,
TV or Set Box VCR
View any source connected to the transmitter module as an extension of the electronic device: Cable /
set top box, TV, Blu-Ray player, DVD player, VCR or Media player. In this mode, you can operate the
Receiver by powering on/off, volume controls and switching different channels on the Home Roam TV
Display Receiver.
6-1. HR TV Transmitter Module Connections
Connect Home Roam TV transmitter module input to the audio video (A/V) outputs of your home
electronic device ( cable box, TV, blu-ray, DVD, VCR or media player), using A/V cables provided.
There are four AV INPUTs: TV/CABLE IN, AV1, AV2 and AV3. Select one or more AV INPUTs which you
would like to connect. For example, connect your home television, cable box from [AV OUT] into either
Home Roam TRANSMITTER [TV/CABLE IN] or any of the [AV1], [AV2], [AV3] inputs, using the included
RCA to RCA cable.
NOTE: Home Roam TV is ideally suited for connecting your cable / Dish Set top box as your TV set
does not have to be turned on in this mode. Please read the following picture.