Envizen HR701 - Manual (Page 6)

Unit Functions
4
5.1 Transmitter Module
1.ANT: 2.4G wireless audio/video signal antenna
2.TV/CABLE IN: R/L/CVBs input, from TV, Cable or Dish set top box
3.TV/CABLE OUT: R/L/CVBs output to TV set.
4.AV1: AV combination input jack
5.AV2: AV combination input jack
6.AV3: AV combination input jack
7.POWER: Connect 9V/1A DC power
8.ON/OFF: Turn on/off the Transmitter Module
1 2
3
4 5 6 7
8
5.2 Display Receiver
14
1
2
3
4
5
6
7
8
10
11
12
13
9
1.VOL+: Adjust receiver unit volume up (Disabled under AUX mode)
2.AV1: Switch to AV1 input channel
3.AV2: Switch to AV2 input channel
4.TV/CABLE: Switch to TV/CABLE input channel
5.AV3: Switch to AV3 input channel
6.AUX: Switch to AUX-in channel
7.VOL-: Adjust receiver unit volume down (Disabled under AUX mode)
8.ON/OFF: Turn on/off the Receiver
9.USB Port (Firmware Upgrade): Do not open the rubber plug. It’s only used for future upgrades
if recommended by the manufacturer.
10.AUX: AV input from local device directly connected, not related to the AV input connected in
Transmitter
11.AV OUT: Pass-through AV output to other display/audio device
12.EARPHONE: Stereo headphone jack
13.DC IN 9V: Connect to 9V/1A DC power
14.ANT: 2.4G wireless audio/video signal antenna