I-View DM-5MIPN30 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 41)

41
DDNS: Click this button to setup the DDNS function, there are three default DDNS server for
the user choice. If your IP Camera is set to use PPPoE as its default network connection, you
can use the Dynamic DNS (DDNS) for network access.
Before you start, please registration on the DDNS server is required before configuring the
DDNS settings of the IP Camera. Please do the process to setup the DDNS.
(1) Enter the DDNS Settings interface:
(2) In the Domain text field, enter the domain name obtained from the DDNS website.
(3) Enter the Port, User Name, Password registered on the DDNS website and the check interval
period of DDNS server. Click to save the settings.
SMTP: The system can be configured to send an Email notification to all designated receivers
if an alarm event is detected, e.g., motion detection event, video loss, tamper-proof, etc.
Before you start, please configure the DNS Server settings before using the Email function.
1. Enter the Email settings interface:
2. Configure the following settings:
Sender: The name of the email sender.
Sender’s Address: The email address of the sender.
SMTP Server address: The SMTP Server IP address or host name (e.g.,smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25.
Transport Mode: Enable SSL function; please check the SSL if it is required by the SMTP