I-View FE-5MIPN 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 13)

13
3) A udio in (Yellow): Plug in Microphone for audio input.
4) Audio output (Red): Plug in Speaker (Request audio amplify) for audio output.
5) BNC cable: Provide composite video signal for lens focus adjustment.
6) Alarm in: Connect to the sensor input (Dry contact).
7) Alarm out: Connect to the trigger device such as light.
8) Rest cable: Turn on the power and push button, the parameters of IP camera
become to default setting.
Camera installation
Fix the camera on the ceiling
1)
Paste the Mount hole sticker on the position that you want to install.
2)
Use the mount hole sticker to make a hole of 30mm in diameter for passing cable, and drill
another 3 holes on the ceiling to fix bracket camera body.
3)
Connect power & LAN cables, and then arrange these cables through the hole of ceiling.
4)
Insert the anchors and fix the screws through the housing.
4 x27 Tp1 BND SUS