I-View FE-5MIPN 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 40)

40
Motion alarm:
Enable Motion detection function and you can setup the trigger schedule and
detection area. Click and drag the left button of Mouse to setup the detection and you also
can select the motion sensitivity. You can specify the linkage method (Such as Trigger alarm
output, move the PTZ camera preset position and notify via email) when an event occurs.
Alarm trigger: The alarm trigger almost same as Motion alarm, please refer the description of
Motion alarm section.
Alarm interval: The trigger of alarm output will be triggered base on the interval period.