MoTeC Snowmobile Plug-In ECU - Manual (Page 38)

30 Appendices MoTeC
M400 Pin Ski‐Doo Pin Function
Additional Ski‐Doo Loom Pins
Unused B03, B04, B05, B06, B08,
B10, B12, B13, B14, B15,
B18, B20, B22, B23, B24,
B25, B30, B33, B34, B35,
B36, B37, B40
Coil 2 A01 Coil2 Drive from IGN4 Module
C02
Coil 3 A29 Coil3 Drive from IGN4 Module
C03
Coil 1 A41 Coil1 Drive from IGN4 Module
C01
ECU
Power
Relay B17 Relay Drive ‐ not used as
Lanyard controls ECU power
Lanyard B26 Lanyard Sense ‐ not used as
Lanyard controls ECU power
Start
Switch B19 Wired to Relay T
Start
Solenoid B31 Wired from Relay T
Dash CAN
Hi B27 STC CAN to Dash @250 kbit/s
S04
Dash CAN
Lo B28 STC CAN to Dash @250 kbit/s
S05
DESS
Immo B38 DESS Comms ‐ not used
K‐Line B24 K‐Line ‐ not used
FWD REL A13 Forward Relay Drive (not
used)
REV REL B33 Reverse Relay Drive (not used)
1‐3: See Calibration and Wiring Notes