J&M HHS-42B - Manual (Page 13)

Pg. 13
SET-UP INSTRUCTIONS (continued)
8. Placing the Red and Silver Reflective Decals
Place the reflective red and silver decals on the along sides of the Upper Bar, Base Unit Main Frame or
Ball Hitch Tongue so at decals are represented on at least half of the overall length.
9. Installing the Safety Chain Around the Ball Hitch Axle
Weldment
Bolt the ring end of the safety chain to the underside of the
gooseneck using one 3/4” x 5” Grade 8 Bolt and 3/4” Lock
Nut. Loop the chain around the Strap Weldment located on
the back side of the front axle.
Red/Silver Decals
Red/Silver Decals
Red/Silver Decals
Red/Silver Decals