J&M Roll Tarp GRAIN CARTS (June 2011 & newer) - Manual (Page 2)

2
ORDER OF OPERATIONS
1. Assemble the Rear Endcap on the floor.
2. Assemble the Front Endcap on the floor.
3. Install the Hanger Bracket.
4. Place the Lip Lock on the opposite auger side of the grain cart.
5. Install the Rear Endcap
6. Install the Rear Endcap Brace
7. Install bolts through the Rear Endcap
8. Install J-Bolts
9. Install the Front Endcap Assembly.
10. Install the Front Endcap Brace.
11. Install bolt through the Front Endcap
12. Install the Tarp Bows.
13. Install the Tarp Cables.
14. Install the Tarp Standoffs.
15. Install the Spring Return.
16. Install the Canvas Tarp.
17. Install the Roll Tarp Stops.
18. Install Pop Rivets onto the Roll Tube.
19. Attach Spring Return to the Roll Tube.
20. Install the Crank Handle.
Tools Needed:
7/16” Wrench
7/16” Socket
9/16” Wrench
9/16” Socket
3/16” Drill Bit
1/4” Drill Bit
7/16” Drill Bit
Vise Grips