J&M Uni-Swivel Hydraulic Auger User Manual
Page 7
7
750-16 OWNER’S MANUAL
SAFETY SIGNS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged or Missing!
IMPORTANT: Install new safety signs if the old signs are
destroyed, lost, painted over or cannot be read. When
parts are replaced that have safety signs, make sure you
install a new sign with each new part. New signs are
available from the manufacturer or your authorized dealer.
Ref. # Description
Part # Req’d
1
Sign, Danger
DD-103 1
2
Sign, Danger
DD-104 1
3
Sign, Warning
DW-106 1
4
Sign, J&M
DI-114 2
5
Sign, Warning
DW-105 1
6
Sign, Caution
DC-110 1
DD-103
DD-104
DD-105
Set-Up of Uni-Swivel Hydraulic Augers
Comes complete with the following:
1 - Auger Tube, Swivel Assembly, with control rod, top spout
1 - Parts Carton - consists of:
1 - 6” diameter rubber spout x 4’ long
1 - 6” hose clamp
2 - 1/2” hydraulic hose x 84”
1 - winch assembly
1 - 1/2” curved rod x 40”
1 - transport bracket w/ ratchet and tie-down strap
1 - coupler bracket
2 - Flat Attaching Brackets
1 - 3 piece adjustable hopper
1 - hose holder bracket
1 - owners manual (set-up) w/winch parts list
1 - Parts Bag - consists of:
1 - 3/8” J-Bolt
2 - 3/8” x 1 1/2” Hex Bolts - Gr 2
2 - 3/8” Lockwashers
1 - 6” rubber strap with hooks
35 - 3/8” Hex Lock Nuts
2 - 3/4” Flatwashers
1 - 9” rubber strap with hooks
20 - 3/8” Hex Nuts
2 - 3/16” Hair Pin Clips
1 - 3/16” pulley (zinc)
6 - 3/8” x 3/4” Hex Bolts - Gr 2
2 - 3/8” x 1” Tab Bolt
2 - 5/16” pulley (zinc) small
27 - 3/8” Flat Washers
2 - 5/16” Shackles
1 - 1/2” pulley (black)
18 - 3/8” x 1/2” Stove Bolts
2 - 3/8” Wing Nuts
1 - 3/16” cable x 11’ (winch)
1 - 1/4” Rope Clamp
27 - 3/8” x 1” Hex Bolts - Gr5
1 - 3/16” cable x 7’ (safety)
1 - Plastic Rope Handle
1 - 5/16” Rope x 15’
3 - 3/16” cable clamps
1 - 3/8” x 3/4” Hex Bolt - Gr 8
1 - 3/8” Lock Nut - Gr 8
Tools Required - Hammer, Screwdriver, Drill with 13/32” Bit, 2 Vise-Grips, 2 - 9/16” wrenches, 1 - 7/16”
Wrench (Two persons are needed for set-up)
1/2” Pulley
(black)
5/16” Pulley
(zinc)
3/16” Pulley
(zinc)
DC-110
DW-106