J&M Uni-Swivel Hydraulic Auger - Manual (Page 9)

9
Swing the auger into the stow position (winch
handle out). Place the transport bracket under
the reinforcing channel of the auger and against
the side of the gravity box. (NOTE: For
increased support, position the transport
bracket as close as possible to the triangular
corner on the front of the gravity box. Be sure
to allow enough room for the reinforcing back
plate which is positioned inside the gravity
box.) Using the Transport Bracket as a
template, drill (4) 13/32” holes into the side of
the gravity box and attach the Transport
Bracket and Backing Plate using four 3/8” x
1” bolts and lock nuts. Attach the Ratchet to
the Transport Brackets as shown using one
3/8” x 3/4” Grade 8 Bolt and 3/8” Grade 8 Lock
Nut. Secure the Auger to the Transport
Bracket by wraping the tie-down strap around
the auger and inserting the hook through the
hole on top of the Transport Bracket. Ratchet
the strap until the auger is firmly secured.
20
32
37
33
34
35
30
29
10
7
11
20
21
20
22
52
20
22
31
6
3
2
1
25
52
28
50
49
42
19
19
17
3
UNI-SWIVEL HYDRAULIC AUGER INSTALLATION
Attach the winch assembly to the auger bracket (for normal mounting, the winch handle is on the left side of the
auger when facing the box) using (3) - 3/8” x 1” hex bolts, flat washers and lock nuts. Attach the end of the
cable to the winch using the clip on the side of the winch. Spool several rounds of cable onto the winch drum
as per instructions on the winch. Attach the 3/16” pulley (zinc) to the bottom hole of the auger cable mounting
tab using a 3/8” x 1” hex bolt and lock nut. Loop the cable through the 3/16” pulley. Remove the 3/8” bolt from
the center of the 1/2” black pulley and position the 1/2” curved rod between the pulley and the pulley bracket.
Reattach the 3/8” bolt and lock nut. (Do not overtighten.) Attach one 5/16” Shackle to the end of the 1/2” black
pulley bracket. Loop the winch cable through the shackle and secure using a 3/16” cable clamp.
Optional 3-Stage
Telescoping Spout
3/8” x 3/4”
Grade 8 Bolt
with Lock Nut
Tie-Down
Hook and
Strap Assy.
Ratchet
Transport
Bracket
4