CEMB USA C202 - Manual (Page 3)

I 0592 - 3
1
GB
1 - GENERAL
1.1 - General safety recommendations
▪ The balancing machine should only be used by duly authorized and trained personnel.
▪ The balancing machine should not be used for purposes other than those described in the instruction
manual.
▪ Under no way should the balancing machine be modifi ed except for those modifi cations made
explicitly by the manufacturer.
▪ Never remove the safety devices. Any work on the machine should only be carried out by duly
authorized specialist personnel.
▪ Do not use strong jets of compressed air for cleaning.
▪ Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
▪ Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the adapter.
▪ The machine operator should not wear clothes with fl apping edges. Make sure that unauthorized person
nel do not approach the balancing machine during the work cycle.
▪ Avoid placing counterweights or other objects in the base which could impair the correct operation of the
balancing
machine.
▪ For TFT monitors, see the specifi c instructions attached.
1.1.1 - Standard safety devices
▪ STOP push button for stopping the wheel under emergency conditions.
▪ The safety guard (option) of high impact plastic is with shape and size designed to prevent risk of
counterweighhyghts
from fl ying out in any direction except towards the fl oor.
▪ A microswitch prevents starting the machine if the guard is not lowered and stops the wheel
whenever the guard is raised.
▪ Protection system on LIFT control.
1.2 - Field of application
The machine is designed for balancing wheels weighing up to 250 kg. It can be operated within a temperature range
of 0° to + 45°C. EMS option: can measure radial geometric deformity (run-out) with all truck wheels.
1.3 - Overall dimensions
►
►
►
►