CHIEF PACCC1 - Manual (Page 6)

PACCC1 Installation Instructions
6
Figure 3
4. Mount speaker to speaker mounting bracket following the
instructions provided with speaker. (See Figure 4)
WARNING: IMPROPER INSTALLATION CAN LEAD TO
SEVERE PERSONAL INJURY OR DAMAGE TO
EQUIPMENT! ALWAYS follow speaker manufacturers
installation instructions when mounting speaker to avoid
possible damage to speaker.
Figure 4
Install Accessory to Mount and Display to
Accessory
1. Install accessory to mount following the installation
instructions provided with the mount. (See Figure 5)
Figure 5
2. Verify latching flag is in the OPEN position. (See Figure 6)
3. Align four mounting buttons on display with four teardrop
mounting holes in accessory.
4. Slide mounting buttons into teardrop mounting holes and
lower display until recessed area of mounting buttons is
seated in lower area of teardrop mounting holes.
WARNING: IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SEVERE PERSONAL
INJURY OR DAMAGE TO EQUIPMENT. Make sure ALL
mounting buttons are properly seated in lower area of four
teardrop mounting holes.
5. Move latching flag to CLOSED position to secure display on
accessory. (See Figure 6)
NOTE: A padlock or similar device can be used to provide
additional security.
3
x2
(J) x1
4
2
x2
Speaker Mounting Bracket
1