Delayed integration enable (intena), G in, Figure 116: delayed integration timing – ALLIED Vision Technologies Stingray F-504 User Manual
Page 316: Table 143: advanced register: delayed inte, Gration enable (intena)
Configuration of the camera
STINGRAY Technical Manual V4.4.4
314
Delayed Integration Enable (IntEna)
A delay time between initiating exposure on the sensor and the activation
edge of the IntEna signal can be set using this register. The on/off flag acti-
vates/deactivates integration delay. The time can be set in µs in DelayTime.
Note
•
Only one edge is delayed.
•
If IntEna_Out is used to control an exposure, it is pos-
sible to have a variation in brightness or to precisely
time a flash.
Figure 116: Delayed integration timing
Register
Name
Field
Bit
Description
0xF1000340 IO_INTENA_DELAY
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1..5]
Reserved
ON_OFF
[6]
Enable/disable integration
enable delay
---
[7..11]
Reserved
DELAY_TIME
[12..31]
Delay time in µs
Table 143: Advanced register: Delayed Integration Enable (IntEna)
Integration time
Integration time
IntEna_real
IntEna_out
Delay
time
Delay
time