Analog Way SmartMatriX Ultra - Manual (Page 33)

33
7.3.7 The miscellaneous section
Then in the NATIVE BKG setup menu you can register up to
8 sets of native Background per screen.
For each set you can choose:
Input source, Frames or color.
Then you can choose the position as well:
The position will be important in the case you choose a Frame/input which has a smaller
resolution than the output resolution, your native background will be place according to
this chosen posistion.
Select for each set the desired native background. Load every set clicking on the set number to be sure your
native background are well setuped. Don’t forget that you can come back to this section at any time during
your show to define new native input or new set.
- PRESET TOGGLE: By default, the SmartMatriX Ultra will swap the Program and Preview buses during each
TAKE. Enabling this option will leave the Preview bus unchanged during each TAKE, and only the Program
will be updated.
- DYNAMIC FIT: Enable or disable the automatic recognition of black band for digital content. The size and
the aspect ratio are automatically adapted.
- PREVIEW ASPECT: Change between 3 ways of displaying the Preview during transition.
- PIP COLOR: Color of PIPs when the source is set to color
- KEYING COLOR: Replacement color when input keying DSK is enabled.
- PRESET AUTO FADE: This is the duration of the auto fade In/fade Out. (See faders in chapter: 7.4.4 Effects)
- SCREEN MIRRORING: Enable or disable access to the mirror effect. (See mirror in chapter: 7.4.4 Effects)
(only useful when using Multi-screen mode).
7.3.7 The miscellaneous section