Analog Way SmartMatriX Ultra - Manual (Page 37)

37
7.3.9 Input management
Under the HDCP section, you can:
- Enable/disable the HDCP communication feature
- Read the HDCP status, very useful to know if the input HDCP communication is active or not.
Next is the IMAGE tab, where you can find all settings about the display of your input:
Under the COLORIMETRY section, you have:
- LEVEL: set up the luminosity level of your input
- CONTRAST: set up the contrast level of your input
- COLOR: set up the color level of your input (0:black and white, full: full color)
- HUE: set up the hue phase of your NTSC signal.
Under the CONTROL section, you have:
-IDENTIFY: Displays a number on your input to quickly identify the source
-PATTERN: Enable test pattern on the input. It allows you to start working without any plugged source.
-BLACK: Turn your input to black
-FREEZE: Freeze/unfreeze your input
-COMPOSITE SYNCH LOAD: Set up to Hi-Z (default) or to a 75Ohm load your input.
Under the OPTIMIZE section, you have:
- AUTO CENTER: Automatic search of the right Clock and Phase of your input. In other words, it automatically
centers your input into the layer. There are a quick search and an advanced search.
- CLOCK: Set up manually the clock of your input
- PHASE: Set up manually the phase of your input
Under the USER GAIN section, you find:
- THE RED/GREEN/BLUE: Increase/decrease the Red/Green/Blue level of your input.