Analog Way SmartMatriX Ultra - Manual (Page 54)

54
7.4.4 Layer selection and native background
Other layer adjustments:
- CLEAR BUTTON: This button allows you to clear the selected layer from your preset
- CLEAR ALL BUTTON: Remove all layers from your preset
- RAISE BUTTON: Increase the Z level (depth) of your layer
- LOWER BUTTON: Decrease the Z level (depth) of your layer
- ALIGN BUTTON: You need first to select at less 2 layers, then you can align them horizontally or
vertically.
- CONTENT SIZE: Set layer size to its content size.
- SCREEN SIZE: Set layer size to screen size.
- CLONE BUTTON: Copy the selected layer into another chosen layer
- KEEP ASPECT RATIO BUTTON: Enabling this feature will keep the layer aspect ratio during resizing.
- WIREFRAME MODE: Allows to enable/disable the layer content on your Web RCS
- TRAP LAYERS ON SCREEN: Disable fact to put a layer out of the screen
- HIDE UNUSED LAYERS: All empty layers will not be displayed into the Web RCS
- RELOAD PROGRAM: Load the preset of the Program screen into the Preview screen
- TOGGLE PRESET: Swap the preset between the Program screen and the Preview screen
- STEP BACK: Return to the configuration you had before the last TAKE.
- MORE BUTTON: Background Cut feature.
The Background Cut is a feature developed by Analog Way engineers which allows you to perform an amazing
effect based on crop feature.
The Background Cut will calculate automatically, depending on your layers sizes/positions, the specific layer
crop, in order to create a full screen image.
HOW TO USE THE BACKGROUND CUT:
Background Cut
First of all select your own preset
2 layers with same input 2 layers make 1 image