Analog Way QuickVu - Manual (Page 46)

46
8.1.1 Menu navigation
8. OPERATING THROUGH THE FRONT PANEL
8.1 Front panel
To access the QuickVu menu, press the EXIT/MENU button in the
control section. To highlight items in the menu which will appear on
the VFD screen, turn the scroll knob left or right to the desired menu
item. When you have reached the desired menu item, press the ENTER
button in the control section to access that menu function. Pressing the
ENTER button when a selection has been made sets the value to that
selection in the QuickVu memory. When all settings have been made,
press the EXIT/MENU button to exit sub-menus and return to the main
menu.
Pressing the MENU button in the menu section of the QuickVu, will display and give you access to the
following items on the menu VFD screen:
- OUTPUT 1: select to set the output types and resolutions of Output #1,
- OUTPUT 2: select to set the output types and resolutions of Output #2,
- INPUT: select to configure the 8 individual input types and resolutions,
- PRESET: select to store and use presets,
- IMAGE*: select to change source image settings of an input,
- KEYING/TITLING*: select to access keying and titling controls and parameters when video layer is selected,
- SCREEN: setup your background color and your Quick Frame,
- LAYER*: select to adjust layer size, position, transparency or transitions,
- FRAMES: select to store (record), use and manage frames into the QuickVu,
- AUDIO: select to access all audio input and output parameters,
- CONTROL: select to access device software information, LAN settings, reset factory settings, and other user
oriented functions.
* These items are only displayed if a valid input is assigned to the current layer.
The QuickVu offers 1 mode to work from: the Mixer mode.
8.1.1 Menu navigation
8.1.2 Home menu
8.1.3 Operating modes
Simply selecting a menu item will not set it to that value. Be sure to press the ENTER button when
parametering the menu items or to push the scroll knob.