Analog Way QuickVu - Manual (Page 49)

49
8.2.4 Output selection settings
- DVI as HDMI: DVI output content as HDMI. Audio is included,
- HDCP DETECT: enable or not the HDCP detection on the output,
- CENTERING PIC: display the centering test pattern,
- TEST PATTERN: choose to display one of the available test pattern.
All changes have to be validated by pressing the ENTER button in order to be saved
NOTE: The output status can provide you all information about the output in real time. This feature is
particularly needed when HDCP is used with long cable to be sure that the communication is well
handled.
8.2.5 Preview features
The Preview output can display all adjustments before the TAKE.
All current layers for the Program are defined by a colorful frame on Preview. They are identified by a letter
and a number with the same color.
- Layer A: Ax, with xx of 1 to 8,
- Layer B: Bx, with xx of 1 to 8, (layer B is always keyed)
- Quick Frame.
Because the number of resources available is limited, the Preview displays only one live or still layer at a time.
The others are only identified by their colorful frame and their number.
8.2.6 Preview Id
The function disables all the display of ID information in Preview mode. The colored frames and numbers
indicating your source selection on each layer are disabled. To set up your Preview Id:
menu > Control > Functions > Preview Id
8.2.7 Working with layers
• To assign a source to a layer, press the Layer button, press the Source# you want to assign.
Ex: Layer A > Source #4
The source number 4 will be displayed in the Layer A.
Press TAKE to view the result on the Program screen
• To delete a layer from the Preview screen:
Press Layers # > Press Black button
Press TAKE to view the result on the Program screen
• To clear all layers on your Preview screen:
Hold the Black button at least 3 seconds
Press TAKE to view the result on the Program screen
• To freeze a layer: Select a Layer > Press Freeze button
8.2.8 Working with layers functions
Once a source is assigned to a layer, you will have access to some layer settings in the Layer menu or direct-
ly by pressing the layer button.
The settings available depend on the layer selected:
- Layer adjusts: set up layer size and position,
- Layer zoom: set up layer zoom size and position,
- Size Templates: adjust a specific size (Fullscreen, 1/2, 1/3, ...),
- Transparency: adjust the layer transparency,
- Opening and Closing effect: adjust the Open/Close effect type and duration,