Analog Way QuickVu - Manual (Page 51)

51
8.2.10 Layer adjustment menu
8.2.10 Layer adjustment menu
• To have access to the layer adjustment menu, a source has to be affected to your layer:
Press Layer# button > Press source #
• To adjust layers:
Press Layer# button > Then go into Layer adjut menu
Press TAKE to view the result on the Program screen
8.2.11 Layers with transitions
Transitions
All the settings are available in the Layer menu after pressing the selected layer.
The transition effects have some shortcuts on the front panel too.
To use it: Press the selected Layer # > Press Effect button, then choose the opening/closing effect
The effect will be immediately attached to the selected layer (Preview).
- CUT: duration time can be set to delay the cut effect,
- FADE:
• Adjustable pre-timed fades or manual transition
with T-Bar,
• Fade between any input, computer or video,
• Adjustable cross-fading duration,
- WIPE:
• Numerous wipes can be selected horizontal and vertical, from the center or outside, in circle, Zoom in and
out,
• Horizontal: from left, center -or- vertical: from up, down, center,
- SLIDE:
• Sliding of video or computer images during the transition,
• Horizontal: from/to left, right -or- vertical: from/to up, down.
A
B
B
A
B
A
Program
Preview
Program
Preview
A