ATI Amplifier Technologies ATP8700 - Manual (Page 9)

10 Source Control Buttons
Operate DVD players, CD players, DVRs, VCRs or other
source component features such as play, record, pause,
stop, fast forward, fast reverse.
11 Source Selector Buttons
These buttons select which input is active in the main
room. The selected source appears on the front panel and
the on-screen display.
12 7.1 Button
The 7.1 key selects the 7.1 audio input and DVD video input.
This operates in the same way as the 7.1 button on the
front panel. It gives you instant access to select the 7.1
CHANNEL INPUT, which is deselected when the source is
changed by using either the remote control handset or the
front panel SOURCE SELECT buttons or by pressing the
7.1 key again.
13 Mode Button
This button toggles between Dolby Surround Pro Logic ® II
Music, Dolby Surround Pro Logic ® II Movie, DTS Neo:6 ®
Music and DTS Neo:6 ® Cinema modes.
14 MUSIC 7 Button
This button places the processor into “7.1 Music” mode.
15 BASS Button
This sets the bass trim for the currently selected input.
16 Status LED Indicator
Indicates when the remote control is in Programming or
Learning mode and flashes to indicate success or failure
of these functions.
17 POWER Button
Turns off the A/V PROCESSOR. Also turns other components
controlled by the remote on and off.
18 PRE CH Button
Changes back to the previously tuned channel.
19 CHANNEL UP and DOWN Buttons
Adjusts the AM/FM radio tuning frequency (ATP8700 and
ATP7700). Frequency appears on both the front panel and
on-screen. Also serves as channel selector when
controlling other devices.
20 TV Button
Toggles between NTSC and PAL video system (for OSD only).
21 EXIT Button
This key exits the setup mode and saves the new settings.
Use it if you have adjusted the setup menu by accident.
Page 9
22 MENU Button
This activates the A/V PROCESSOR’s on-screen menu.
It also serves as enter button for numeric keypad when
controlling other devices.
23 STEREO Button
This places the A/V PROCESSOR into “Music” mode.
24 SUR Button
This places the A/V PROCESSOR into “Surround” mode.
24 ZONE Button
Activate remote for “Zone 2” function control (i.e. volume,
seek, input source selection, mute and off).
24 SHIFT/EX Button
This key allows you to toggle between AM and FM on the
tuner input (ATP8700 and ATP7700) and toggles between
Dolby EX ON and OFF.
AM/FM Tuner Operation
The high quality built-in AM/FM tuner (ATP8700 and ATP7700)
has an auto-tune feature and may be programmed with up to
10 presets. When using presets, it is not necessary to switch
bands manually. You can save AM and FM station presets
randomly. Your presets will not be lost in the event of a
power failure.
To use the the tuner, press the tuner button on the front
panel or on the remote control. Choose the AM or FM band
by pressing the AM/FM toggle button. To auto-tune up or
down the band, momentarily press the seek-up or seek-down
button on the front panel or the CH up or CH down buttons
on the remote control. The tuner will begin to scan and will
lock on to the next useable station received. To set a station
as a preset, hold one of the 10 preset buttons on the remote
control until you hear the station mute momentarily. The
station is now saved as that preset number.