Asus Barebone System Vintage-PE2 - Manual (Page 24)

C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n 2 - 8 2 - 8 2 - 8 2 - 8 2 - 8
F a s t e n e r F a s t e n e r F a s t e n e r F a s t e n e r F a s t e n e r
M o t h e r b o a r d h o l e M o t h e r b o a r d h o l e M o t h e r b o a r d h o l e M o t h e r b o a r d h o l e M o t h e r b o a r d h o l e
• When you buy a boxed Intel ® Pentium ® 4 processor, the package
includes the CPU fan and heatsink assembly. If you buy a CPU
separately, make sure that you use only Intel
® -certified
multi-directional heatsink and fan.
• Your Intel ® Pentium ® 4 LGA775 heatsink and fan assembly comes in
a push-pin design and requires no tool to install.
Make sure to orient each fastener with the narrow end of the groove
pointing outward. (The photo shows the groove shaded for emphasis.)
To install the CPU fan and heatsink assembly:
1. Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the
holes on the motherboard.
N a r r o w e n d N a r r o w e n d N a r r o w e n d N a r r o w e n d N a r r o w e n d
o f t h e g r o o v e
o f t h e g r o o v e o f t h e g r o o v e o f t h e g r o o v e o f t h e g r o o v e
Orient the heatsink and fan
assembly such that the CPU
fan cable is closest to the
CPU fan connector.
2.4.2 2.4.2 2.4.2 2.4.2 2.4.2 Installing the CPU fan and heatsink Installing the CPU fan and heatsink Installing the CPU fan and heatsink Installing the CPU fan and heatsink Installing the CPU fan and heatsink
The Intel Pentium 4 LGA775 processor requires a specially designed
heatsink and fan assembly to ensure optimum thermal condition and
performance.
If you purchased a separate CPU heatsink and fan assembly, make sure
that you have properly applied Thermal Interface Material to the CPU
heatsink or CPU before you install the heatsink and fan assembly.