Draw-Tite 24853 SPORTFRAME HITCH - Manual (Page 2)

Installation Instructions
Part Numbers:
24853
60269
77225
Hyundai Sonata, Kia Optima
All models
Detail showing how to trim muffler heat shields.
Vehicle Forward
11”
2-1/2”
Cut 1/2” from
t f h l
Nip corner
6”
2-1/2”
center of hole
This area to be cut out
P ‘ id ffl h t hi ld
Driver’s side heat shield trimmed opposite
This area to be cut out
with metal shears.
Passenger ‘s side muffler heat shield
z 2010, 2011 Cequent Performance Products Sheet 2 of 6 24853N 2-11-11 Rev. B
Form: F205 Rev A 5-6-05
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
Tighten 8mm-1.25 Gr. 10.9 bolts with torque wrench to 27 Lb.-Ft. (37 N*M) Tighten 3/8”-16 Gr.5 bolts with torque wrench to 45 Lb.-Ft. (61 N*M)