Draw-Tite 50073 CUSTOM QUICK INSTALL BRACKETS - Manual

Installation Instructions
CUSTOM QUICK INSTALL MOUNTING KIT
2011 & UP Ford Super Duty F-250/F-350/F-450
2011 & UP
Part Number:
50073
WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing
capacity.
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
10 Bolt System: Instructions for 58058 or 30035 on pages 1-4. Fasteners that are not identify are supplied with rail kit 58058. **
4 Bolt System: Instructions for 30124 or 30095 on pages 5-7. Fasteners that are not identify are supplied with rail kit 30124. ***
Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame..
4 Bolt System: Instructions for 30124 or 30095 on pages 5 7. Fasteners that are not identify are supplied with rail kit 30124.
10 BOLT INSTALLATION
Equipment Required:
Fastener Kit: 50073F
Wrenches: 3/4, 7/8, 15/16, 15 mm, 18mm
Drill Bits: 1/8”, 9/16”
Other Tools: Center Punch, Measuring Tape
All Fasteners
Typical Both Sides
Vehicle Forward
Figure 1
2011 & UP h
3
3
1
2011 & UP shown
2 Driver’s side frame bracket
USE THIS HOLE ON PASSENGERS SIDE
1
2
Fasteners listed below are supplied with this kit, all other mentioned
fasteners are supplied with part number 30035, 58058, 30095 or 30124.
Item Description Qua nti ty
1 SPACER 1/4" x 1 1/2" x 2" 8
2 BOLT AND WASHER M14 X 45 4
3 NUT AND RETAINER M14 4
z 2010 Cequent Performance Products, Inc. Sheet 1 of 7 50073N 12/10/10 Rev. A
4 WASHER FLAT 1/4" (See FIG. 1c) 2
5 NUT, NYLOK 1/4"‐20 (See FIG. 1c) 1
6 BOLT, HEX HEAD 1/4"‐20 x 1 1/4" GRADE 2 (See FIG. 1c) 1
7 L‐BRACKET (See FIG. 1c) 1