Mounting for an installation with 1 collector – DE DIETRICH NEO 2.1 User Manual
Page 50
Advertising
4.5.8.
Mounting for an installation with 1 collector
n Installing the solar collector
A
Screw the lower fastening lugs onto the bottom batten.
B
Fit the collector. The fastening lugs must be fitted into the
holding groove.
C
Postion the upper fastening lugs in the holding groove on
the collectors and screw them onto the batten.
The solar panels should only be installed shortly before the solar-
heating system is to be commissioned. This will minimise the time that
the solar panels are exposed to heat while not filled with heat-
transporting fluid.
M001813-C
A
B
C
A + B
66
0
24
5
A + B
C
C
4. Installation
NEO 2.1 / SUN 211
49
30/11/2011 - 300021356-001-F
Advertising