DE DIETRICH AWHP-2 MIT-IN-2 iSystem User Manual
Page 34
Advertising
The setting of the control panel and/or of the remote control has a
considerable influence on energy consumption.
A few tips
:
4
In the room in which the room thermostat is installed, it’s advised
not to use thermostatic valve radiators. If a thermostatic valve is
used the valve must be fully opened.
4
Completely closing and opening thermostatic valve radiators
causes undesirable temperature fluctuations. Open and close
thermostatic valves in small steps.
4
Lower the temperature to around 20°C. This reduces heating costs
and energy consumption.
4
Lower the temperature when you air the rooms.
4
When setting a time schedule , bear days when you are absent
and holidays in mind.
7. Energy savings
AWHP-2 MIT-IN-2 iSystem
33
31/03/2014 - 7616372-001-02
Advertising