eLine Technology PRO3 Effio E - Manual (Page 15)

27 28
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
LEVEL: 000-255
Specifies the R and B gain values for manual WB.
The actual variable range is limited to the range from the low color temperature
(approx. 1800K) to the high color temperature (approx. 10500K).
Default setting is 58
• PUSH LOCK Press down on joystick to set current scene as the white
balance level. Use a grey card in front of lens to give a
natural white level.
DAY/NIGHT AUTO / COLOR / B/W /EXT1 /EXT2
SETUP MENU
LANGUAGE ENGLISH
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
DAY/NIGHT AUTO
PICT ADJUST 
2DNR 
NEXT
EXIT SAVE ALL
Day night mode, can be set to COLOR or AUTO. Auto allows fine settings of the
transition time from day-night, and vice versa. COLOR setting retails color only.
DAY/NIGHT
BURST ON
DELAY CNT 10
DAY - NIGHT 3
NIGHT - DAY 5
RETURN
BURST: ON / OFF
Selects whether to output the burst
signal when night mode has been identified.
DELAY CNT: 000-255
Night/Day identification transfer time.
DAY - NIGHT: 000-255
Threshold for Night status from day status.
NIGHT - DAY: 000-255
Threshold for the Day status from night status.
B/W SETUP: Allows additional Smart IR settings to be enabled.
B/W SETUP
BURST ON
IR OPTIMIZER ON
MODE AUTO
LEVEL 16
RETURN
MODE: AUTO / CENTER
With Mode for Smart IR Set allow user to position the Front Light
Compensation feature of the camera to center position of image. or to
automatic area.
This feature operates also when day/night mode is set to Auto, but you
have to enable from the B/W setup to Enable the SMART IR option.
EXT1: This is the setting that’s used for IR LED models
The EXT1 is used to sync IR LED operation with the
going into B/W mode.