eLine Technology HDSDI-412 - Manual (Page 17)

17
Pic 2-17 Sensor - Basic
Enable sensor alarm and set the alarm type according to triggered alarm type. Two
option: low level and high level
User can setup all channels with same parameters, please tick off “All”, and then to do
relevant setup.
Click “Default” button to resort default setting; click “apply” button to save the setting;
click “Exit” button to exit current interface.
2> Alarm handling
Pic 2-18 alarm handling -alarm configuration-sensor
Select hold time and click setting button. Then a dialog box will pop-up as below：
Pic 2-19 alarm handling -alarm configuration
eLineTechnology.com