eLine Technology HDSDI-412 - Manual (Page 26)

26
Pic 2-39 Cruise set - preset pointsetting
Click Add icon，to set the speed and time of preset point; select a preset point and
click Delete icon to delete that preset poin；click Modify icon ， to modify the setting of
a preset point；User can click those icons to adjust the position of preset point.top 、
up 、down and bottom 。 Click Preview button to preview the cruise line and then click
“OK” button to save the setting. Next, click “Exit” button to exit current interface
Select a preset point in the cruise line list box and click Delete button to delete that
cruise line; click “Clear all” button to clear all cruise line from the list box; click “OK” button to
save the setting; click “Exit” button to exit current interface.
In the Advance interface, click track “Setting” button to pop up a dialog box as below：
Pic 2-40 Track setting
User can control the dome rotates up, up left, down, right down, left, left down, right
and up right and stop rotating. adjust the rotate speed and the value of zoom, focus and iris
of the dome；click Start Record button to record the move track of PTZ and click this button
again can stop record；click Start track button to play recorded track and click this button
again can stop play . The user can drag the slider to adjust the rate of P.T.Z movement.
Click icon to hide the tool bar, right-key can remerge it; click icon to exit the
current interface.
In the Advance interface, click “Default” button to resort default setting; click “Apply”
button to save the setting; click “Exit” button to exit current interface.
eLineTechnology.com