eLine Technology HDSDI-412 - Manual (Page 19)

19
Pic 2-22 Alarm handling
Alarm configuration, trigger video alarm handling, linkage alarm handling
and sensor alarm handling trigger settings is same.
Click on "Area Settings" button at Motion detection interface,trun to the
following window;
Pic 2-23 Motion detection - Regional Settings
At area Setting interface, users can drag the slider to adjust the sensitivity value (1-5),
the default value is 4, 1-5 sensitivity progressive increase. Sensitivity influenced by the color
of time (day or night), the users should adjust according to actual situation.click
icon，
set All locales for the detection region；click icon，will clear setting detection region；
click icon，save setting；click button,exit from current interface.
User can setup all channels with same parameters, please tick off “All”, and then to do
relevant setup.
Click “Default” button to resort default setting; Click “Apply” button to save the setting;
click “Exit” button to exit current interface.
2.4.5.3 Video loss
Pic 2-24 Video loss
eLineTechnology.com