EXP Computer Bluetooth: Wireless HotSync of the Handspring Visor - Manual (Page 2)

serial port. Here is a quick overview of the process:
1) Install BTW and BlueShare on your Windows Computer (98SE, 2000, or Me version)
2) Install the Handspring organizer software on your Windows Computer (98SE, 2000, or
Me version) if necessary.
3) Insert the BlueConnect card into your Visor
4) Use the Visor to inquire for the BlueShare device
5) Use the Visor to discover the “Generic Serial” service on the BTW system. Select this
service so that the first attempt to utilize a serial link will automatically create a
Bluetooth connection to the BTW system.
6) Using the BTW dialogs, determine what Virtual COMM (VCOMM) port will be
assigned to the BTW side of the SPP link
7) Configure the HotSync manager on the PC to use the VCOMM port that you uncovered
in step 6.
8) Select some files to HotSync on your PC. Use the Handpring organizer software to
queue them up for HotSync.
9) Initiate a HotSync from the Visor side.
10) When the HotSync is finished, terminate the SPP link by shutting down the
BlueConnect card on the Visor.
3. Setup
3.1 B LUE S HARE /BTW S ETUP
3.1.1 Connect BlueShare to your PC or Laptop
Installing the BlueShare is quick and painless. Regardless of which Development Kit that you
buy, a BlueShare device will always be accompanied by a Universal Serial Bus (USB) cable for
connecting your PC or laptop computer to