EXP Computer Bluetooth: Wireless HotSync of the Handspring Visor - Manual (Page 8)

3.2.2 Configure the Visor for Local HotSync
There are many ways to HotSync a Visor. In order to do so over Bluetooth, you must have your
HotSync preferences configured correctly.
1) To access the HotSync preferences, tap on the icon on the main Visor menu.
2) Tap on the icon and select “LANSync Prefs” from the drop-down menu.
3) Make sure that the “Local HoySync” choice is selected as shown
4) If you had to change the setting, tap on “OK” to register your choice.
3.2.3 Configuring BlueConnect as an SPP Client
SPP connectivity requires a remote device with a SPP server running the Bluetooth Serial Port
Profile. The name of the SPP service running under BTW is “Generic Serial”.