EXP Computer Bluetooth: Wireless HotSync of the Handspring Visor - Manual (Page 9)

1. On the Visor, run the “Discover” application by tapping on the icon to start up
the Bluetooth stack. The application will start by displaying all local devices that are
stored in its database. Tap the “Setup” button to confirm that the Visor is in the
“Client” mode. If not, tap the “Client” selector to change the unit to client mode and
tap “OK” on the “Connection Mode” dialog that appears are a
2. Perform a device inquiry by tapping “Inquire” in order to locate the BlueShare device.
3. Select the device by tapping on its BD address. Perform service discovery on this unit
by tapping the “Discover” button. Verify that the target SPP server is shown and
supports the Serial Port