EXP Computer CD-820_CDG-820 User Manual
Page 23
2) Choose the Drivers icon from Control Panel, and choose the Add button to set
up the driver [MCI] CD Audio.
3) Start the Media Player.
4) Select Device CD Audio from the menu bar.
5) Click the play button on the screen to start it.
6) Connect headphones set to the Headphone Jack
7) If your computer is equipped with a sound card, you can also connect the LINE-
OUT jack of your CD-ROM to the LINE-IN jack of the sound card with a 3.5
mm audio cable. This will result in a better audio output from the speakers of
the sound card.
The PLAY/PAUSE, NEXT/PREVIOUS buttons will still work in CD-ROM mode.
However, these buttons should be used in audio CDs playing mode ONLY. Using
these buttons other than playing audio CDs will cause an error. Also, do use these
buttons along with a CD audio software utilities. Otherwise, incorrect information
may be reported by the CD audio software.