EXP Computer CD-820_CDG-820 - Manual (Page 26)

APPENDIX A
INSTALLING THE CD-ROM WITH THE GAME PORT ADAPTER
(FOR CDG-820 MODEL ONLY)
• •
CD-ROM Connector:
This connector connects to the CD-
ROM drive.
‚ ‚
Game Port:
This port connects to a joystick or
game-pad.
ƒ ƒ
PC Card Connector:
Connector to the PCMCIA(PC Card)
interface card - CD-ROM+ card
1. Connect the game adapter to your CD-ROM drive, and tighten the two screws
on the game adapter.
2. Connect a joystick or game-pad to game port
3. Connect the PCMCIA interface card to the Game Adapter, and then tighten the
two screws on the cable connector.
4. Place your CD-ROM drive in the horizontal position. Your CD-ROM drive is
designed to operate only in the horizontal position. Operating the CD-ROM
drive in any abnormal position is not recommended.
5. Locate the PCMCIA slot on your computer or consult your computer user’s
manual for its location.
6. Align the PCMCIA interface card with the arrow sign pointing toward the
computer’s slot. (Please note that the card is keyed to guide for proper
insertion.)
7. Slowly insert the PCMCIA interface card into the slot and press firmly until the
connector is seated.
8. Turn your system ON and install the CD TRAVELER device driver. Please
follow the Software Installation procedures to follow.