EXP Computer DVD-780 - Manual (Page 15)

- 16 -
USING THE PCMCIA DVD-ROM
BASIC OPERATING PROCEDURE
1. Make sure there is power to your drive.
2. Push gently but firmly, the eject button on the front panel to open the
tray. The tray will come out a short distance of about 2.5 cm.
3. Hold down the drive and gently pull the tray out until a disc can be
loaded.
4. Place the disc into the tray with the label side up and the hole in the
center of the disc snapped onto the raised circle in the center of the
tray. Make sure the disc is firmly seated horizontally.