EXP Computer DVD-780 - Manual (Page 5)

- 6 -
REAR PANEL
1. Power Button:
Press the button to manually power on/off the drive when it is powered
by an AC adapter.
2. DC in Jack:
This jack connects to the AC adapter.
3. Power Source Switch:
This switch is used to select the power source. When the Switch is set to
“PC”, then PCMCIA power direct is selected. When it is set to “DC”,
an AC adapter is required to power the CD-ROM/DVD-ROM.
4. PCMCIA Interface Connector:
Connects the drive to the PCMCIA interface card.
5. Audio Line Out Jack:
Sends audio signal to an external amplifier.
Figure 2