EXP Computer DVD-780 - Manual (Page 9)

- 10 -
SOFTWARE INSTALLATION
SOFTWARE INSTALLATION FOR WINDOWS 95
If you are inserting the PCMCIA DVD-ROM into your computer for the
very first time, and an “Update Device Driver Wizard” dialog box appears
as below, it means your Windows 95 is version 4.00.950B, i.e. OSR 2.
In this case, perform the following steps for installing the PCMCIA DVD-
ROM under Windows 95. Otherwise, ignore and skip this section and read
the next section for installing the PCMCIA DVD-ROM for Windows 95.
(older version)
1. Insert the PCMCIA DVD-ROM device driver disk into your floppy
drive.
2. Click the Next button.
3. Click the Finish button. All the remaining installations will then proceed
automatically.