EXP Computer ThinCD - Manual (Page 5)

- 5 -
PART NAMES AND FUNCTIONS
FRONT PANEL
The front panel of your CD-ROM may look slightly different from the
figure shown below. The important parts and functions, however, are the
same regardless their locations.
1. Eject button:
Press this button to eject the tray.
2. Access LED:
This LED will blink when the drive is accessing the disc.
3. Emergency Hole:
Insert a pin shaped item to manually eject the tray in case of power-off.
4. Power LED:
This LED will light when power is on.
Figure 1