BJM Pumps SX75CSSF-575T - Manual (Page 5)

5
SAFETY
Pump installations are seldom identical. Each installation and application can vary due to many
different factors. It is the owner/service mechanics responsibility to repair, service, and test to
ensure that the pump integrity is not compromised according to this manual.
Risk of electric shock
– this pump has not been investigated for use in
swimming pool areas.
Do not pump flammable or volatile liquids. Death or serious injury
will result.
Before attempting to open or service the pump:
1) Familiarize yourself with this manual.
2) Unplug or disconnect the pump power cable to ensure that the pump will remain
inoperative.
3) Allow the pump to cool if overheated.
Do not operate the pump with a worn or damaged electric power cable.
Death or serious injury could occur.
Never attempt to alter the length or repair any power cable with a splice.
The pump motor and pump motor and cable must be completely waterproof. Damage to the
pump or personal injury may result from alterations.
After the pump has been installed, make sure that the pump and all piping
are secure before operation.
Do not lift the pump by the power cable piping or discharge hose. Attach
proper lifting equipment to the lifting handle (or lifting rings) fitted to the pump. Do not suspend
the pump by the power cable.
Obtain the services of a qualified electrician to troubleshoot, test and/or
service the electrical components of this pump.
Pumps and related equipment must be installed and operated according
to all national, local and industry standards.
INSPECTION
Review all safety information before servicing pump.