Brooks Instrument GT1000 - Manual (Page 9)

1-3
Section 1 Introduction Installation and Operation Manual
X-VA-GT1000-eng
Part Number: 541B078AAG
March, 2014
GT1000 Series
Table 1-1 Specifications - GT1000
Capacities and Pressure Drops Capacities and Pressure Drops Capacities and Pressure Drops Capacities and Pressure Drops Capacities and Pressure Drops See Capacities and Pressure Drop Tables 1-3, 1-4 and 1-5
Flow Flow Flow Flow Flow Accur Accur Accur Accur Accuracy acy acy acy acy Standard: ±2% Full Scale, Class 2.5 acc VDI/VDE
Optional: ±1% Full Scale, Class 1.6 acc VDI/VDE
Repeatability Repeatability Repeatability Repeatability Repeatability ≤ 0.5% Full Scale
Pressure Ratings/PED Categories Pressure Ratings/PED Categories Pressure Ratings/PED Categories Pressure Ratings/PED Categories Pressure Ratings/PED Categories See Pressure Ratings/PED Categories Table 1-2 for maximum non-shock pressure
Scales Scales Scales Scales Scales Single or dual detachable aluminum plate
Nominal Lengths: 127mm, 200mm and 250mm
Graduations: Choice of direct reading units, millimeter or percentage of maximum flow with factor tag
Ambient Temperature Limits Ambient Temperature Limits Ambient Temperature Limits Ambient Temperature Limits Ambient Temperature Limits 33 to 125°F (1°C to 52°C)
Operating Fluid Temperature Limits Operating Fluid Temperature Limits Operating Fluid Temperature Limits Operating Fluid Temperature Limits Operating Fluid Temperature Limits Maximum: 250°F (121°C)
(Meter) (Meter) (Meter) (Meter) (Meter) Minimum: 33°F (1°C)
Operating Fluid Temperature Limits Operating Fluid Temperature Limits Operating Fluid Temperature Limits Operating Fluid Temperature Limits Operating Fluid Temperature Limits Maximum: 250°F (121°C) - Reed Switch
(Alarms) (Alarms) (Alarms) (Alarms) (Alarms) Maximum: 167°F (75°C) - Inductive Switch
Minimum: 33°F (1°C) - Reed Switch/Inductive Switch
Dimensions Dimensions Dimensions Dimensions Dimensions See Dimensions Figure 1-4
Materials of Construction Materials of Construction Materials of Construction Materials of Construction Materials of Construction
Metering Tube Metering Tube Metering Tube Metering Tube Metering Tube Borosilicate glass
Window Window Window Window Window Polycarbonate with UV inhibitor
Floats Floats Floats Floats Floats Size 2 and 6: Sapphire, glass, Carboloy ® , 316 stainless steel
Size 7: Glass, 316 stainless steel
Sizes 8-13: 316 stainless steel
Float Stops Float Stops Float Stops Float Stops Float Stops Size 2, 6, 12 and 13: Teflon ®
Size 7, 8, 9 and 10: 316 stainless steel springs
Housing Housing Housing Housing Housing Cast Aluminum with Epoxy paint
End Fittings End Fittings End Fittings End Fittings End Fittings Brass or 316/316L stainless steel (1.4404)
O-rings O-rings O-rings O-rings O-rings Viton ® fluoroelastomers, Buna-N, Kalrez ® perfluoroelastomers (Stainless steel body only), EPDM (Stainless steel body only)
Hardware Hardware Hardware Hardware Hardware Stainless steel
Connections Connections Connections Connections Connections Brass or stainless steel fittings: NPT or BSPT/RC female connections
Stainless steel fittings: 150 lbs. flanges per ANSI B 16.5
Connection Orientation Connection Orientation Connection Orientation Connection Orientation Connection Orientation Vertical or horizontal on inlet and/or outlet
Certifications Certifications Certifications Certifications Certifications Declaration of Compliance 2.1
International Calibration Certificate
Declaration of Compliance 2.1 Pressure Test
Hazardous Location Certificate
Material Certification to DIN 3.1
Declaration of Compliance 2.1 Oxygen Service
Table 1-2 GT1000 Pressure Ratings and PED Categories
Maximum Operating Pressure (PSIG/bar) at Fluid Temperature: Up to 250°F (121°C)
Meter NPT ANSI 150# RF PED
Size Threaded Connections Flanged Connections Category
2 500/34.5 240/16.5 SEP
6 450/31 240/16.5 SEP
7 300/20.7 240/16.5 SEP
8 250/17 240/16.5 SEP
9 200/13.8 200/13.8 SEP
10 175/12.1 175/12.1 SEP
12 100/6.9 100/6.9 See Note
13 75/5.2 75/5.2 See Note
Note: Size 12 and 13 do not conform to Pressure Equipment Directive 97/23/EC,
therefore cannot be sold or used in the EU/EFTA.