Burkert Type 8605 - Manual (Page 6)

20
10.1. Decommissioning
�witch off the Control Electronics Type 8605 as follows:
→
Depressurize the system.
→
�witch off the power supply.
→
Remove the Control Electronics.
→
Keep the control electronics in the original packaging
or in some other suitable packaging.
10.2. Restarting
�witch on the Control Electronics Type 8605 again as follows:
→
Unpack the Control Electronics and allow it to reach room
temperature before switching on again.
→
Then proceed as described in chapter “8. Installation”.
11. DISPOSAL
→
Dispose of the device and packaging in an environmen�
tally friendly manner.
NOTE!
Damage to the environment caused by device com-
ponents contaminated with media.
• Observe applicable regulations on disposal and the
environment.
Observe national waste disposal regulations.
english
Type 8605