ADIC FCR 200 - Manual (Page 85)

Perform Configuration 6-13
Ethernet Configuration
This option allows for the network IP address and mask to be
set, as well as allowing the Ethernet MAC address to be
overridden.
Fibre Channel-to-SCSI Mapping
Configuration
This option allows selecting the addressing mode of the
FCR200, as well as displaying attached devices. The menu to
modify the Indexed addressing table is also accessed through
this menu.
Ethernet Configuration Menu
Version: X.X.XXXX
Current Ethernet Configuration:
Ethernet Physical Address : 30:30:45:30:30:32
IP Address : 38.152.100.150
Subnet Mask : 255.255.255.0
1) Change Ethernet Physical Address
2) Change IP Address
3) Change IP Subnet Mask
4) Change SNMP Settings
5) Change security Settings
X) Return to previous menu
Fibre Channel to SCSI Configuration Menu
Version: X.X.XXXX
Current Fibre Channel to SCSI Mapping Mode is Indexed
1) Display Attached SCSI Devices, LUN Priority
2) Display Attached SCSI Devices, Target ID Priority
3) Display Attached SCSI Devices, Bus Number Priority
4) Change the Fibre Channel to SCSI Mapping Mode
5) Show/Edit Fibre Channel to SCSI Mapping Mode
X) Return to previous menu