Burkert Type 7800 - Manual (Page 16)

18
4.15 Capacity limitation
This function offers the possibility of reducing the
maximum pump capacity (MAX CAP). It influences
the functions in which the pump is normally operating
at maximum capacity.
Under normal operating conditions, the pump cannot
operate at a capacity which is higher than the one
stated in the display. This does not apply to the max-
imum capacity button
, see section 4.3.
Fig. 16
4.16 Counters
The pump can display “non-resettable” counters for:
• “QUANTITY”
Accumulated value of dosed quantity in litres or
US gallons.
• “STROKES”
Accumulated number of dosing strokes.
• “HOURS”
Accumulated number of operating hours.
• “POWER ON”
Accumulated number of times the electricity sup-
ply has been switched on.
Fig. 17
100%
Set maximum
capacity
Operating display
Operating display
Total number
of strokes
Total number
of operating
hours
Total number
of starts
Total dosed
quantity