Inspection screw – Burkert Type S056 User Manual
Page 9
Advertising
SENSOR FOR ELECTROMAGNETIC FLOW METER – MANUAL
9
ESENS_FULLBORE_05.doc
Inspection
screw
3°
Verify periodically the sensor’s seals integrity: with
piping full of liquid, unscrew the Inspection
screws (see drawing aside) and verify the total
absence of liquid from inspection hole!
After the above operation, REMEMBER to close
again the holes.
In case of leakage contact immediately our
Customer Service.
When flowmeter is installed horizontally, ensure minimum angle of 3° for self draining purposes
Advertising