Fluid Components International FS2000L - Manual (Page 9)

NuTec ® Series Fluid Components International LLC
Doc. No. 06EN003348 Rev. D 9
This page is subject to the proprietary rights statement on the last page
CE
Information
CE DECLARATION OF CONFORMITY
FS2000/LS2000/FS2000L/FS2000H Series
We, Fluid Components Intl, located at 1755 La Costa Meadows Drive, San Marcos, California 92069-
5187 USA, declare under our sole responsibility that the FS2000/LS2000/FS2000L/FS2000H Series,
Flow and Level Monitoring Switches, to which this declaration relates, are in conformity with the
following standards and Directives.
EMC Directive 89/336/EEC, May 3, 1989 of the European Union
Immunity specification: EN 61000-6-2 /1998, EN 61000-4-2,-3,-4,-5 /1995, EN 61000-4-6 /1996
EN 61000-4-11 /1994 (FS2000L only)
Emissions specification: EN55022 1998 Class A and CISPR 22 1997 Class A.
(Conducted emissions not tested, not applicable for industrial standard)
Pressure Equipment Directive 97/23/EC.
The FS2000, LS2000 and FS2000H Models do not have a pressure bearing housing and are therefore
not considered as pressure equipment by themselves according to article 1, section 2.1 of the Directive.
Model FS2000L is in conformity with the sound engineering practices as defined in the Pressure
Equipment Directive (PED) 97/23/EC article 3, paragraph 3, instruments with a line size greater than 25
mm are limited by the requirements of Annex II, table 6 as define in article 3 section 1.3.
Issued at San Marcos, California USA
23, June 2004
_______________________________
Eric J. Wible, Engineering Manager
Flow/Liquid Level/Temperature Instrumentation
Visit FCI on the Worldwide Web: www.fluidcomponents.com
1755 La Costa Meadows Drive, San Marcos, California 92069 USA 760-744-6950 Π800-854-1993 Π760-736-6250
European Office: Persephonestraat 3-01 5047 TTTilburg РThe Netherlands РPhone 31-13-5159989 ΠFax 31-13-5799036
Doc no. 23EN000008B
Eric Wible
2004.09.28
15:22:48 -08'00'
Section F - Approval Information