Fluid Components International ST98 Profibus C101-U Module User Manual
Page 5
DOCUMENT NUMBER
06EN003344
SUBJECT
Users Guide – ST98 Profibus
CAGE CODE
64818
DATE
03/27/03
SECTION
PAGE
2 of 3
REVISION
A
NOTICE OF PROPRIETARY RIGHTS: THIS DOCUMENT CONTAINS CONFIDENTIAL TECHNICAL DATA, INCLUDING TRADE SECRETS AND
PROPRIETARY INFORMATION WHICH ARE THE PROPERTY OF FLUID COMPONENTS INTL (FCI)
3.2 ST98 ADDRESS SETUP
The ST98 PROFIBUS address setup and Bus speed selection are done is with the use of the
GANTNER "Configuration Software ICP 100" . See opening screen below
On the dialog box "Module Information" the address and Baud rate of the actual E.BLOXX is
displayed. After changing the settings they need to be loaded into the E.BLOXX module, and this
is done by selecting the menu item "Send to Module" or "Send To Module As..." from the menu
"File"